UPSC IAS / HPSC / RAS study material Biology part 4

study material Biology

UPSC IAS / HPSC / RAS study material Biology part 4

UPSC IAS / HPSC / RAS study material Biology part 4

study material Biology

MORPHOLOGY OF FLOWERING PLANTS

  • The wide range in the structure of higher plants will never fail to fascinate us. Even though the angiosperms show such a large diversity in external structure or morphology, they are all characterized by presence of roots, stems, leaves, flowers and fruits.
  • They may be bearing flowers and fruits. The underground part of the flowering plant is the root system while the portion above the ground forms the shoot system.

1 THE ROOT

  • In majority of the dicotyledonous plants, the direct elongation of the radicle leads to the formation of primary root which grows inside the soil.

study material Biology

study material Biology

 

  • It bears lateral roots of several orders that are referred to as secondary, tertiary, etc. roots. The primary roots and its branches constitute the

tap root system, as seen in the mustard plant.

  • In monocotyledonous plants, the primary root is short lived and is replaced by a large number of roots.
  • These roots originate from the base of the stem and constitute the fibrous root system, as seen in the wheat plant .
  • In some plants, like grass, Monstera and the banyan tree, roots arise from parts of the plant other than the radicle and are called adventitious roots.
  • The main functions of the root system are absorption of water and minerals from the soil, providing a proper anchorage to the plant parts, storing reserve food material and synthesis of plant growth regulators.

1.1 Regions of the Root

The root is covered at the apex by a thimble-like structure called the root cap.

study material Biology

  • It protects the tender apex of the root as it makes its way through the soil. A few millimetres above the root cap is the region of meristematic activity.
  • The cells of this region are very small, thin-walled and with dense protoplasm.
  • They divide repeatedly. The cells proximal to this region undergo rapid elongation and enlargement and are responsible for the growth of the root in length.
  • This region is called the region of elongation. The cells of the elongation zone gradually differentiate and mature. Hence, this zone, proximal to region of elongation, is called the region of maturation.
  • From this region some of the epidermal cells form very fine and delicate, thread-like structures called root hairs.
  • These root hairs absorb water and minerals from the soil.

study material Biology

1.2 Modifications of Root

study material Biology

study material Biology

  • Roots in some plants change their shape and structure and become modified to perform functions other than absorption and conduction of water and minerals.
  • They are modified for support storage of food and respiration.
  • Tap roots of carrot, turnips and adventitious roots of sweet potato, get swollen and store food.
  • Can you give some more such examples? Have you ever wondered what those hanging structures are that support a banyan tree? These are called prop roots.
  • Similarly, the stems of maize and sugarcane have supporting roots coming out of the lower nodes of the stem. These are called stilt roots.
  • In some plants such as Rhizophora growing in swampy areas, many roots come out of the ground and grow vertically upwards. Such roots, called pneumatophores, help to get oxygen for respiration.

THE STEM

  • What are the features that distinguish a stem from a root? The stem is the ascending part of the axis bearing branches, leaves, flowers and fruits.
  • It develops from the plumule of the embryo of a germinating seed. The stem bears nodes and internodes.
  • The region of the stem where leaves are born are called nodes while internodes are the portions between two nodes. The stem bears buds, which may be terminal or axillary.
  • Stem is generally green when young and later often become woody and dark brown. The main function of the stem is spreading out branches bearing leaves, flowers and fruits. It conducts water, minerals and photosynthates.
  • Some stems perform the function of storage of food, support, protection and of vegetative propagation.

2.1 Modifications of Stem

study material Biology

  • The stem may not always be typically like what they are expected to be. They are modified to perform different functions .
  • Underground stems of potato, ginger, turmeric, zaminkand, Colocasia are modified to store food in them. They also act as organs of perenation to tide over conditions unfavourable for growth.
  • Stem tendrils which develop from axillary buds, are slender and spirally coiled and help plants to climb such as in gourds (cucumber, pumpkins, watermelon) and grapevines.
  • Axillary buds of stems may also get modified into woody, straight and pointed
  • Thorns are found in many plants such as Citrus, Bougainvillea.
  • They protect plants from browsing animals. Some plants of arid regions modify their stems into flattened (Opuntia), or fleshy cylindrical (Euphorbia) structures.
  • They contain chlorophyll and carry out photosynthesis. Underground stems of some plants such as grass and strawberry, etc., spread to new niches and when older parts die new plants are formed.
  • In plants like mint and jasmine a slender lateral branch arises from the base of the main axis and after growing aerially for some time arch downwards to touch the ground.
  • A lateral branch with short internodes and each node bearing a rosette of leaves and a tuft of roots is found in aquatic plants like Pistiaand Eichhornia. I
  • n banana, pineapple and Chrysanthemum, the lateral branches originate from the basal and underground portion of the main stem, grow horizontally beneath the soil and then come out obliquely upward giving rise to leafy shoots.

3 THE LEAF

study material Biology

study material Biology

  • The leaf is a lateral, generally flattened structure borne on the stem. It develops at the node and bears a bud in its axil.
  • The axillary bud later develops into a branch. Leaves originate from shoot apical meristems and are arranged in an acropetal order.
  • They are the most important vegetative organs for photosynthesis. A typical leaf consists of three main parts: leaf base, petiole and lamina.
  • The leaf is attached to the stem by the leaf base and may bear two lateral small leaf like structures called In monocotyledons, the leaf base expands into a sheath covering the stem partially or wholly.
  • In some leguminous plants the leafbase may become swollen, which is called the
  • The petiole help hold the blade to light. Long thin flexible petioles allow leaf blades to flutter in wind, thereby cooling the leaf and bringing fresh air to leaf surface.
  • The laminaor the leaf blade is the green expanded part of the leaf with veins and There is, usually, a middle prominent vein, which is known as the midrib.
  • Veins provide rigidity to the leaf blade and act as channels of transport for water, minerals and food materials.
  • The shape, margin, apex, surface and extent of incision of lamina varies in different leaves.

3.1 Venation

  • The arrangement of veins and the veinlets in the lamina of leaf is termed as venation. When the veinlets form a network, the venation is termed as reticulate.
  • When the veins run parallel to each other within a lamina, the venation is termed as parallel.
  • Leaves of dicotyledonous plants generally possess reticulate venation, while parallel venation is the characteristic of most

study material Biology

3.2 Types of Leaves

  • A leaf is said to be simple, when its lamina is entire or when incised, the incisions do not touch the midrib.
  • When the incisions of the lamina reach up to the midrib breaking it into a number of leaflets, the leaf is called
  • A bud is present in the axil of petiole in both simple and compound leaves, but not in the axil of leaflets of the compound leaf. The compound leaves may be of two types.
  • In a pinnately compound leaf a number of leaflets are present on a common axis, the rachis, which represents the midrib of the leaf as in neem.
  • In palmately compound leaves, the leaflets are attached at a common point, i.e., at the tip of petiole, as in silk cotton.

3.3 Phyllotaxy

Phyllotaxy is the pattern of arrangement of leaves on the stem or branch. This is usually of three types – alternate, opposite and whorled.

study material Biology

  • In alternate type of phyllotaxy, a single leaf arises at each node in alternate manner, as in china rose, mustard and sun flower plants.
  • In opposite type, a pair of leaves arise at each node and lie opposite to each other as in Calotropis and guava plants.
  • If more than two leaves arise at a node and form a whorl, it is called whorled,as in Alstonia.

3.4 Modifications of Leaves

study material Biology

  • Leaves are often modified to perform functions other than photosynthesis. They are converted into tendrils for climbing as in peas or into spines for defence as in
  • The fleshy leaves of onion and garlic store food.
  • In some plants such as Australian acacia, the leaves are small and short-lived. The petioles in these plants expand, become green and synthesise food.
  • Leaves of certain insectivorous plants such as pitcher plant, venus-fly trap are also modified leaves.

4 THE INFLORESCENCE

study material Biologystudy material Biology

  • A flower is a modified shoot wherein the shoot apical meristem changes to floral meristem.
  • Internodes do not elongate and the axis gets condensed. The apex produces different kinds of floral appendages laterally at successive nodes instead of leaves.
  • When a shoot tip transforms into a flower, it is always solitary. The arrangement of flowers on the floral axis is termed as
  • Depending on whether the apex gets converted into a flower or continues to grow, two major types of inflorescences are defined – racemose and
  • In racemose type of inflorescences the main axis continues to grow, the flowers are borne laterally in an acropetal
  • In cymose type of inflorescence the main axis terminates in a flower, hence is limited in growth.
  • The flowers are borne in a basipetal order .

5 THE FLOWER                           

  • The flower is the reproductive unit in the angiosperms. It is meant for sexual reproduction.
  • A typical flower has four different kinds of whorls arranged successively on the swollen end of the stalk or pedicel, called thalamus or receptacle.
  • These are calyx, corolla, androecium and gynoecium. Calyx and corolla are accessory organs, while androecium and gynoecium are reproductive organs.
  • In some flowers like lily, the calyx and corolla are not distinct and are termed as perianth. When a flower has both androecium and gynoecium, it is

study material Biology

  • A flower having either only stamens or only carpels is unisexual.
  • In symmetry, the flower may be actinomorphic(radial symmetry) or zygomorphic(bilateral symmetry).
  • When a flower can be divided into two equal radial halves in any radial plane passing through the centre, it is said to be actinomorphic, e.g., mustard, datura, chilli.
  • When it can be divided into two similar halves only in one particular vertical plane, it is zygomorphic,g., pea, gulmohur, bean, Cassia. A flower is asymmetric(irregular) if it cannot be divided into two similar halves by any vertical plane passing through the centre, as in canna.
  • A flower may be trimerous, tetramerous or pentamerous when the floral appendages are in multiple of 3, 4 or 5, respectively.
  • Flowers with bracts, reduced leaf found at the base of the pedicel, are called bracteates and those without bracts, ebracteate.
  • Based on the position of calyx, corolla and androecium in respect of the ovary on thalamus, the flowers are described as hypogynous, perigynous and epigynous.
  • In the hypogynous flower the gynoecium occupies the highest position while the other parts are situated below it. The ovary in such flowers is said to be superior, e.g., mustard, china rose and brinjal.
  • If gynoecium is situated in the centre and other parts of the flower are located on the rim of the thalamus almost at the same level, it is called perigynous.
  • The ovary here is said to be half inferior,e.g., plum, rose, peach. In epigynous flowers, the margin of thalamus grows upward enclosing the ovary completely and getting fused with it, the other parts of flower arise above the ovary.
  • Hence, the ovary is said to be inferior as in flowers of guava and cucumber, and the ray florets of sunflower.

study material Biology

5.1 Parts of a Flower

  • Each flower normally has four floral whorls, viz., calyx, corolla, androecium and gynoecium.

study material Biology

5.1.1 Calyx

  • The calyx is the outermost whorl of the flower and the members are called sepals. Generally, sepals are green, leaf like and protect the flower in the bud stage.
  • The calyx may be gamosepalous (sepals united) or polysepalous (sepals free).

5.1.2 Corolla

  • Corolla is composed of petals. Petals are usually brightly coloured to attract insects for pollination. Like calyx, corolla may be also free (gamopetalous) or united (polypetalous).
  • The shape and colour of corolla vary greatly in plants. Corolla may be tubular, bell-shaped, funnel-shaped or wheel-shaped.

Aestivation:

study material Biology

  • The mode of arrangement of sepals or petals in floral bud with respect to the other members of the same whorl is known as
  • The main types of aestivation are valvate, twisted, imbricate and
  • When sepals or petals in a whorl just touch one another at the margin, without overlapping, as in Calotropis, it is said to be valvate.
  • If one margin of the appendage overlaps that of the next one and so on as in china rose, lady’s finger and cotton, it is called
  • If the margins of sepals or petals overlap one another but not in any particular direction as in Cassia and gulmohur, the aestivation is called
  • In pea and bean flowers, there are five petals, the largest (standard) overlaps the two lateral petals (wings) which in turn overlap the two smallest anterior petals (keel); this type of aestivation is known as vexillary or papilionaceous (gamopetalous)or united (polypetalous).
  • The shape and colour of corolla vary greatly in plants. Corolla may be tubular, bell-shaped, funnel-shaped or wheel-shaped.

5.1.3 Androecium

  • Androecium is composed of stamens. Each stamen which represents the male reproductive organ consists of a stalk or a filament and an anther.
  • Each anther is usually bilobed and each lobe has two chambers, the pollen-sacs.
  • The pollen grains are produced in pollen-sacs. A sterile stamen is called Stamens of flower may be united with other members such as petals or among themselves.
  • When stamens are attached to the petals, they are epipetalousas in brinjal, or epiphyllous when attached to the perianth as in the flowers of lily.
  • The stamens in a flower may either remain free (polyandrous) or may be united in varying degrees.
  • The stamens may be united into one bunch or one bundle (monoadelphous)as in china rose, or two bundles (diadelphous)as in pea, or into more than two bundles (polyadelphous)as in citrus.
  • There may be a variation in the length of filaments within a flower, as in Salvia and mustard.

5.1.4 Gynoecium

  • Gynoecium is the female reproductive part of the flower and is made up of one or more carpels.
  • A carpel consists of three parts namely stigma, style and ovary. Ovary is the enlarged basal part, on which lies the elongated tube, the style.
  • The style connects the ovary to the stigma. The stigma is usually at the tip of the style and is the receptive surface for pollen grains. Each ovary bears one or more ovules attached to a flattened, cushion-like placenta.
  • When more than one carpel is present, they may be free (as in lotus and rose) and are called
  • They are termed syncarpous when carpels are fused, as in mustard and tomato.
  • After fertilisation, the ovules develop into seeds and the ovary matures into a fruit.

Placentation:

study material Biology

  • The arrangement of ovules within the ovary is known as placentation.
  • The placentation are of different types namely, marginal, axile, parietal, basal, central and free central
  • In marginal placentation the placenta forms a ridge along the ventral suture of the ovary and the ovules are borne on this ridge forming two rows, as in pea.
  • When the placenta is axial and the ovules are attached to it in a multilocular ovary, the placentaion is said to be axile, as in china rose, tomato and lemon. In parietal placentation, the ovules develop on the inner wall of the ovary or on peripheral part.
  • Ovary is one-chambered but it becomes two chambered due to the formation of the false septum, e.g., mustard and Argemone.
  • When the ovules are borne on central axis and septa are absent, as in Dianthus and Primrose the placentation is called free central. In basal placentation, the placenta develops at the base of ovary and a single ovule is attached to it, as in sunflower, marigold

6 THE FRUIT

  • The fruit is a characteristic feature of the flowering plants. It is a mature or ripened ovary, developed after fertilisation.

study material Biology

  • If a fruit is formed without fertilisation of the ovary, it is called a parthenocarpic Generally, the fruit consists of a wall or pericarp and seeds.
  • The pericarp may be dry or fleshy. When pericarp is thick and fleshy, it is differentiated into the outer epicarp,the middle mesocarp and the inner endocarp.
  • In mango and coconut, the fruit is known as a drupe. They develop from monocarpellary superior ovaries and are one seeded.
  • In mango the pericarp is well differentiated into an outer thin epicarp, a middle fleshy edible mesocarp and an inner stony hard endocarp.
  • In coconut which is also a drupe, the mesocarp is fibrous.

7 THE SEED

study material Biology

 

  • The ovules after fertilisation, develop into seeds. A seed is made up of a seed coat and an embryo.
  • The embryo is made up of a radicle, an embryonal axis and one (as in wheat, maize) or two cotyledons (as in gram and pea).

7.1 Structure of a Dicotyledonous Seed

  • The outermost covering of a seed is the seed coat. The seed coat has two layers, the outer testa and the inner
  • The hilum is a scar on the seed coat through which the developing seeds were attached to the fruit.
  • Above the hilum is a small pore called the micropyle.
  • Within the seed coat is the embryo, consisting of an embryonal axis and two cotyledons.
  • The cotyledons are often fleshy and full of reserve food materials.
  • At the two ends of the embryonal axis are present the radicle and the plumule.
  • In some seeds such as castor the endosperm formed as a result of double fertilisation, is a food storing tissue.
  • In plants such as bean, gram and pea, the endosperm is not present in mature seeds and such seeds are called non endospermous.

7.2 Structure of Monocotyledonous Seed

study material Biology

 

  • Generally, monocotyledonous seeds are endospermic but some as in orchids are non-endospermic. In the seeds of cereals such as maize the seed coat is membranous and generally fused with the fruit wall.
  • The endosperm is bulky and stores food. The outer covering of endosperm separates the embryo by a proteinous layer called aleurone layer.
  • The embryo is small and situated in a groove at one end of the endosperm.
  • It consists of one large and shield shaped cotyledon known as scutellum and a short axis with a plumule and a radicle.
  • The plumule and radicle are enclosed in sheaths which are called coleoptiles and coleorhiza

8 SEMI-TECHNICAL DESCRIPTION OF A TYPICAL  FLOWERING PLANT

  • Various morphological features are used to describe a flowering plant.
  • The description has to be brief, in a simple and scientific language and presented in a proper sequence.

study material Biology

  • The plant is described beginning with its habit, vegetative characters – roots, stem and leaves and then floral characters inflorescence and flower parts.
  • After describing various parts of plant, a floral diagram and a floral formula are presented.
  • The floral formula is represented by some symbols. In the floral formula, Br stands for bracteate K stands for calyx , C for corolla, P for perianth, A for androecium and G for Gynoecium, G for superior ovary and inferior ovary,  for male,  for female , for bisexual plants,  for actinomorphic  and for  zygomorphic nature of flower.
  • Fusion is indicated by enclosing the figure within bracket and adhesion by a line drawn above the symbols of the floral parts.
  • A floral diagram provides information about the number of parts of a flower, their arrangement and the relation they have with one another.
  • The position of the mother axis with respect to the flower is represented by a dot on the top of the floral diagram.
  • Calyx, corolla, androecium and gynoecium are drawn in successive whorls, calyx being the outermost and the gynoecium being in the centre.
  • Floral formula also shows cohesion and adhesion within parts of whorls and in between whorls.
  • The floral diagram and floral formula in Figure represents the mustard plant (Family: Brassicaceae)

9 DESCRIPTIONS OF SOME IMPORTANT FAMILIES

9.1 Fabaceae This family was earlier called Papilonoideae, a subfamily of family Leguminosae.

  • It is distributed all over the world .

study material Biology

Vegetative Characters

Trees, shrubs, herbs; root with root nodules

Stem:

erect or climber

Leaves:

alternate, pinnately compound or simple; leaf base, pulvinate; stipulate; venation reticulate.

Floral characters

Inflorescence:  Racemose

 Flower: bisexual, zygomorphic

Calyx: sepals five, gamosepalous; imbricate aestivation

 Corolla: petals five, polypetalous, papilionaceous, consisting of a posterior standard, two lateral wings, two anterior ones forming a keel (enclosing stamens and pistil), vexillary aestivation

Androecium: ten, diadelphous, anther dithecous

Gynoecium: ovary superior, mono carpellary, unilocular with many ovules, style single

Fruit: legume; seed: one to many, non-endospermic

Floral Formula:

Economic importance : Many plants belonging to the family are sources of pulses (gram, arhar, sem, moong, soyabean; edible oil (soyabean, groundnut); dye (indigofera); fibres (sunhemp); fodder(Sesbania, Trifolium),ornamentals (lupin, sweet pea); medicine (muliathi).

9.2 Solanaceae

  • It is a large family, commonly called as the ‘potato family’. It is widely distributed in tropics, subtropics and even temperate zones

study material Biology

Vegetative Characters

Plants mostly, herbs, shrubs and small trees

Stem: herbaceous rarely woody, aerial; erect, cylindrical, branched, solid or hollow, hairy or glabrous, underground stem in potato (Solanum tuberosum)

Leaves: alternate, simple, rarely pinnately compound, exstipulate; venation reticulate Floral Characters Inflorescence : Solitary, axillary or cymose as in Solanum

Flower: bisexual, actinomorphic Calyx: sepals five, united, persistent, valvate aestivation

Corolla: petals five, united; valvate aestivation Androecium:stamens five, epipetalous

Gynoecium: bicarpellary, syncarpous; ovary superior, bilocular, placenta swollen with many ovules

 Fruits: berry or capsule

Seeds: many, endospermous

Floral Formula:

Economic Importance

Many plants belonging to this family are source of food (tomato, brinjal, potato), spice (chilli); medicine (belladonna, ashwagandha); fumigatory (tobacco); ornamentals (petunia).

9.3 Lilaceaestudy material Biology

 

 

  • Commonly called the ‘Lily family’ is a characteristic representative of monocotyledonous plants. It is distributed world wide.

Vegetative characters: Perennial herbs with underground bulbs/corms/ rhizomes

Leaves mostly basal, alternate, linear, exstipulate with parallel venation

Floral characters

Inflorescence: solitary / cymose; often umbellate clusters

Flower: bisexual; actinomorphic

 Perianth tepal six (3+3), often united into tube; valvate aestivation

Androcium: stamen six, (3+3)

Gynoecium: tricarpellary, syncarpous, ovary superior, trilocular with many ovules; axile placentation

Fruit: capsule, rarely berry

Seed: endospermous

Floral Formula:

Economic Importance

Many plants belonging to this family are good ornamentals (tulip, Gloriosa), source of medicine (Aloe), vegetables (Asparagus), and colchicine (Colchicum autumnale).

SUMMARY

  • Flowering plants exhibit enormous variation in shape, size, and structure, mode of nutrition, life span, habit and habitat.
  • They have well developed root and shoot systems. Root system is either tap root or fibrous. Generally, dicotyledonous plants have tap roots while monocotyledonous plants have fibrous roots. The roots in some plants get modified for storage of food, mechanical support and respiration.
  • The shoot system is differentiated into stem, leaves, flowers and fruits. The morphological features of stems like the presence of nodes and internodes, multi-cellular hair and positively phototropic nature help to differentiate the stems from roots.
  • Stems also get modified to perform diverse functions such as storage of food, vegetative propagation and protection under different conditions.
  • Leaf is a lateral outgrowth of stem developed exogenously at the node. These are green in colour to perform the function of photosynthesis.
  • Leaves exhibit marked variations in their shape, size, margin, apex and extent of incisions of leaf blade (lamina).
  • Like other parts of plants, the leaves also get modified into other structures such as tendrils, spines for climbing and protection respectively.
  • The flower is a modified shoot, meant for sexual reproduction. The flowers are arranged in different types of inflorescences.
  • They exhibit enormous variation in structure, symmetry, position of ovary in relation to other parts, arrangement of petals, sepals, ovules etc. After fertilization, the ovary is converted into fruits and ovules into seeds.
  • Seeds either may be monocotyledonous or dicotyledonous. They vary in shape, size and period of viability.
  • The floral characteristics form the basis of classification and identification of flowering plants.
  • This can be illustrated through semi-technical descriptions of families. Hence, a flowering plant is described in a definite sequence by using scientific terms.
  • The floral features are represented in the summarized form as floral diagrams and floral formula.

 You may like similar other articles: 

 

 

 

 

Comment ( 1 )

  • I see you don’t monetize your blog, don’t waste your traffic, you
    can earn extra cash every month because you’ve got
    high quality content. If you want to know how to make extra money, search
    for: Mrdalekjd methods for $$$

Leave a Reply

error: Content is protected !!